Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ENGLISH
SPARK SCREEN CLEANING
1.
Drive the machine on a level fl oor.
2.
Engage the parking brake with the pedal (82) and the lever (75).
3.
Turn the ignition key (69) to "0".
4.
Remove the screws (48), then disengage the fasteners (49) to remove the left side bulkhead (47).
5.
Remove the mounting screws, then remove the engine exhaust end pipe (53).
6.
Clean the spark screen as shown in the Petrol Engine Manual.
7.
Perform steps 4 and 5 in the reverse order.
SPARK PLUG CLEANING/REPLACEMENT
1.
Drive the machine on a level fl oor.
2.
Engage the parking brake with the pedal (82) and the lever (75).
3.
Turn the ignition key (69) to "0".
4.
Open the hood (23) and fasten it with the support rod (55).
5.
Remove the screws (45), then disengage the fasteners (46) to remove the engine guard (44).
6.
Clean/replace the spark plug (51), as shown in the Petrol Engine Manual.
7.
Perform steps 4 and 5 in the reverse order.
FUSE CHECK/REPLACEMENT/RESET
1.
Drive the machine on a level fl oor and engage the parking brake with the pedal (82) and the lever (75).
2.
Turn the ignition key (69) to "0".
3.
Open the hood (23) and fasten it with the support rod (55).
Lamellar fuse check/replacement
4.
Remove the cover (A, Fig. 29) and mark the positions of the fuses shown on the adhesive.
5.
Check/replace the relevant fuse among the following (B):
•
F1 fuse (30 A): Key circuit
•
F2 fuse (30 A): Filter shaker
•
F3 fuse (30 A): Vacuum system
•
F4 fuse (30 A): Hydraulic pump
•
F5 fuse (10 A): Flashing light (optional)
•
F6 fuse (10 A): Working light (optional)
•
F7 fuse (10 A): Hopper actuator
•
F8 fuse (30 A): Spare fuse
Charging system fuse check/replacement
6.
Check/replace the FD (70 A) charging system fuse (50).
Circuit breaker check
7.
Check for deactivation of one of the following fuses, then reset it after the relevant motor has cooled down:
•
FA fuse (C, Fig. 29): Right side broom motor circuit breaker
•
FB fuse (D): Left side broom motor circuit breaker (optional)
•
FC fuse (E): Main broom motor circuit breaker
Assembly
8.
Assemble the components in the reverse order of disassembly.
30
USER MANUAL
A
1463388000(1)2008-05 A
E
C
B
Figure 29
SR 1301 P
D
P100249
Advertenties
Hoofdstukken
Inhoudsopgave
