Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operation
Starting initial commissioning
√ The check list for initial commissioning is
displayed.
• The PowerSet entry is selected.
• The checkboxes are not selected.
Advices
• When a check list item is called up the corre-
sponding checkbox is automatically selected.
• The following items are only displayed if the
use of a reactive power characteristic curve
is prescribed for the country selected in the
Country item:
• – Reactive power characteristic curve
(reactive power characteristic curve type)
– Number of nodes
– Node 1
– Node 2
– Node n
– Display characteristic curve
1)
: Only displayed for reactive power character-
istic curve type Enter characteristic curve.
2)
: Only displayed if Number of nodes has
been set to a value > 2.
• Initial commissioning is completed by calling
up the Finish item.
• Finish can only be performed when all other
checkboxes are selected.
1.
Press
2.
Press SET to call up the item.
The items are described separately below.
1.
Press SET. The first digit of the PowerSet
code flashes.
2.
Press
PowerSet code.
3.
Press SET. The change is adopted.
4.
Press
code is highlighted.
5.
Repeat steps 1 to 3 for the second digit of
the PowerSet code.
6.
Press ESC. The check list is shown.
Language
1.
2.
Press SET. The language is adopted.
3.
Press ESC. The check list is shown.
Date format
1.
Press
2.
Press SET. The date format is adopted.
3.
Press ESC. The check list is shown.
Date
1.
Press SET. The date flashes.
2.
3.
Press SET. The change is adopted.
4.
5.
Repeat steps 1 to 3 for the month.
6.
7.
Repeat steps 1 to 3 for the year.
8.
Press ESC. The check list is shown.
Time format
1.
2. Press SET. The time format is adopted.
3. Press ESC. The check list is shown.
1)
1)
1)
1) 2)
to select a check list item.
to change the first digit of the
. The second digit of the PowerSet
Press to select a display language.
to select a date format.
Press to change the day.
Press . The month is selected.
Press . The year is selected.
Press to select a time format.
Time
1.
2.
3.
4.
5.
6.
Country selection
Advice
The country can only be set once!
1.
2.
3.
4.
Reactive power characteristic curve
1.
2.
3.
4.
Advice: An additional Load Templates menu point
is shown when "cosPhi = 1" was not selected.
1.
2.
3.
4.
5.
Number of nodes
1.
2.
3.
4.
Node n
1.
Advice: P% cannot be changed at the first and last
nodes (000%.100%).
2.
3.
4.
5.
6.
Display characteristic curve
1.
2.
10
Press SET. The hour display flashes.
Press to change the hour.
Press SET. The change is adopted.
Press . The minutes are selected.
Repeat steps 1 to 3 for the minutes.
Press ESC. The check list is shown.
Press
to select a country.
Press SET.
Press ESC. The dialogue shown on the left is
displayed.
Press ESC to select a different country by
performing steps 1 and 2 or press
SET for a longer period of time (> 1 s) to
confirm the currently selected country. The
check list is shown.
Press ESC to call up this point.
to mark one type of reactive power
characteristic.
Press SET. The reactive power type is ac-
cepted.
Press ESC. The check list is shown..
Press
,
to mark Load Templates.
Press SET.
Press
, to select a standard characteristic.
Press SET.
Standard characteristic is accepted.
Press ESC. The check list is shown.
Press SET. The value flashes.
Press
to change the number of nodes.
Press SET. The value is adopted.
Press ESC. The check list is shown.
Press
to select a parameter for the node.
Press SET. The parameter value flashes.
Press
to change the value.
Press SET. The change is adopted.
If necessary repeat steps 1 to 4 for the other
parameters.
Press ESC. The check list is shown.
The previously set reactive power characteristic
curve is displayed graphically (example in Fig.
left).
Press ESC. The check list is shown.
Advertenties
Hoofdstukken
Inhoudsopgave
