RML93xx
7.12
Removing the freezer compartment
Proceed as follows (fig. f, page 7):
➤ Release the freezer compartment door with a screwdriver (A).
➤ Remove the freezer compartment door (B).
➤ Release the freezer compartment base on both sides (C).
➤ Remove the freezer compartment base (D).
I
NOTE
• Keep the freezer compartment door and the base in a safe place to
prevent any damage.
• When installing, replace the parts in the reverse order.
7.13
Defrosting the cooler
A
NOTICE!
Never use mechanical tools to remove ice or to loosen objects stuck to
the device.
I
NOTE
Over time, frost builds up on the cooling fins inside the refrigerator. If this
layer of frost is about 3 mm thick, you should defrost the refrigerator.
➤ Disconnect the voltage and gas supply.
➤ Empty the refrigerator.
➤ Put a cloth in the freezer compartment and the refrigerator to absorb any excess
water.
➤ Leave the door open.
✓ The thawed water of the main refrigerator runs into a receptacle on the back of
the refrigerator where it evaporates.
➤ Wipe both compartments dry with a cloth.
EN
Using the refrigerator
29