Advertenties
To switch to operating mode:
Tap the function key or
touch the touchscreen or
open or close a module flap.
4.2
Initial setup of station
NOTICE
i
i
During the initial setup, the maintenance station starts
in X-dock Manager mode (XDM mode). To change the
mode see Chapter 6.4 on Page 27.
1. Switch on the station, see Chapter 4.1 on Page 20.
2. Log in with the preconfigured "admin" user
(user name: admin, password: 123456), see Chapter 4.5
on Page 21.
3. Configure the test gas inlet, see Chapter 4.6 on Page 22.
4. Change language if necessary:
a. Select
> System configuration > Language.
b. Select desired language.
c. Confirm selection with OK.
5. Set date and time where necessary:
a. Select
> System configuration > Date & time.
b. Make the desired settings.
c. Confirm settings with OK.
4.3
Touchscreen display
The buttons on the touchscreen display change dynamically
depending on the task being executed. To execute an action,
select the corresponding icon on the display.
Press the
key on the master at any time to access the start
screen.
4.4
Start and test screens
The keys on the start and test screen change dynamically
depending on the log-in status, single-mode status and the
number of modules in use. For more information see the
X-dock 5300/6300/6600 Technical Manual.
4.4.1
Symbols
Menu
Select this button to access the
menu.
Confirm
Select this button to confirm an input
or function.
Cancel
Select this button to cancel an input
or function.
Back
Select this button to access the
previous screen.
Dräger X-dock 5300/6300/6600
Log user in or
Select this button to log users in or
out
out. The number in the symbol
indicates the permission level (see
Chapter 6 on Page 26).
XDM server
Connected
connection
XDM server
Not connected
connection
4.5
Logging users in or out
NOTICE
i
i
A User-ID is required to log in. This must be created
beforehand by the administrator.
NOTICE
i
i
Data protection: If an export is made available to a
third party, it must be ensured that this third party is
authorised to handle this data.
A user with administrator rights is created by default:
User name: admin
Password: 123456
NOTICE
i
i
Dräger recommends changing the admin password
after initial start-up.
NOTICE
i
i
After switching to GDC mode, the Admin user is no
longer available. All user administration tasks must
take place in GDC. Dräger recommends creating an
Admin user in GDC before commissioning the X-dock.
To log in a user:
1. Select
.
a. Select
.
b. Select the desired user name from the list.
or
a. Select Select user.
b. Enter desired user name.
2. Enter the password and confirm with
NOTICE
i
i
When entering the user name, 3 already saved user
names will automatically be suggested and displayed.
For quick selection, please select the desired user
name.
To log out the current user:
1. Select
.
Information about the current user will be displayed.
2. Select
.
The current user will be logged out.
Basics
.
21
Advertenties
