Inhoudsopgave
Advertenties
Installation Guide
Application test function
Enter the "Test" menu via the installer key.
The Application test (APP test) is specific for each applica-
tion. The test is split into steps to ensure that all compo-
nents are installed correctly. Please follow the process.
Test steps
Step 1:1 Go to mixing shunt control valve actuator, and
verify that the valve opens fully (up to 3 minutes opening
time can be expected). After 5 minutes, the mixing shunt
valve actuator will close again.
During the 5 minute test period, the display on the Master
Controller will also show the measured supply flow tem-
perature in the display.
Parts list
Pos. 1
088U0093-96
Pos. 2
088U05XX / 088U06XX / 088U07XX
Pos. 3
NC: 088H3110 / NO: 088H3111
Pos. 4
087B1165
Pos. 5.
NC: 088H3110 / NC: 193B2148
6 | © Danfoss | FEC | 2018.12
Expansion Module for Danfoss Icon™ Master
RUN
INSTALL
UNINSTALL
TEST
1 pc. Danfoss FHM-Cx Mixing shunt
1 set Danfoss Manifold (types FHF or BasicPlus or SSM)
xx pcs. thermal actuator, 24 V TWA-A
1 pc. ESM-11 PT-1000 sensor
1 pc. thermal actuator, 24 V (types TWA-A or ABN-FBH)
TEST NET
OK
TEST APP
TEST FLO
VIMDE20F / 088N2100
Advertenties
Inhoudsopgave
