Inhoudsopgave
Advertenties
The product is only designed for use with the gas specified on its marking. Never try to fit to
a gas cylinder specified for a different gas type.
If you suspect that the inner parts of the combination valve have been contaminated, it must
be discontinued from service immediately.
Do not exceed the maximum torque allowed for the cylinder. Excessive torque may damage
the combination valve thread preventing its reuse. Certain types of cylinders may require a
torque lower than specified in EN ISO 13341. Check the max. allowed torque value with your
cylinder supplier.
EN
Multiple reassembly can damage the inlet stem thread.
Be careful not to damage the external components of the valve, such as the E-GAUGE.
6.1.3. SETTING UP THE E-GAUGE
Is necessary to set the following parameters correctly for the E-GAUGE to function correctly:
•
Volume of cylinder to which the E-GAUGE valve is installed [in litres]
•
Physical units in which the pressure shall be displayed [bar/MPa/psi]
These parameters can be factory pre-set or they can be set or modified by the customer as
needed using the GCE eGauge mobile application.
6.1.3.1. Installation of GCE eGauge mobile application
Request an application installation file and an access PIN to set up your E-GAUGE. Use the
installation file to install the mobile application on your device with the operating system
Android 5 or higher.
Note: To start the installation, enable the function "install applications from unknown sources"
in the Android operating system.
6.1.3.2. Description of the mobile application
Starting the mobile application
Home screen, login
All manuals and user guides at all-guides.com
Start the GCE eGauge mobile application by clicking the
appropriate icon. This icon will appear on the mobile device
desktop after successful installation. The application will
require access to the camera and Bluetooth enabled.
A.
Input field to enter an access PIN to allow access to the
E-GAUGE parameterization.
B.
Key for confirmation of the entered PIN code and to switch
to the next screen.
C.
Key for access without PIN verification - read only mode, no
parameterization of the E-GAUGE.
14/132
Advertenties
Inhoudsopgave
