Inhoudsopgave
Advertenties
CHANNEL 1: selects one of the 8 colours, colour cycle or rainbow effect
CHANNEL 2: selects one of the 8 gobos or the gobo cycle
CHANNEL 3: selects gobo rotation speed and direction
CHANNEL 4: selects strobe and lamp on/off function
CHANNEL 5: pan movement (max. 540°)
CHANNEL 6: tilt movement (max. 280°)
CHANNEL 7: selects prism or normal lens
CHANNEL 8: selects prism rotation and speed
The LED next to the DIP switches indicates the status of the DMX signal. The LED flashes when the DMX signal is
being used. The LED remains lit continuously when the VDP250MH8 does not recognise the signal and the LED
stays off when there is no DMX input signal.
6. Cleaning and Maintenance
1. All screws for installing the devices or parts of the device have to be screwed tight and must not be corroded.
2. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be modified or tampered with e.g. do not drill extra holes in mounting supports, do not change the
location of the connections, ...
3. The electric power supply cables must not show any damage. Have the device installed by a qualified technician.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist cloth. Do not use alcohol or solvents.
6. There are no user-serviceable parts, apart from the lamp and the fuse (see "4. Installation" on p. 2).
7. Contact your dealer for spare parts if necessary.
7. Technical Specifications
Power Supply
Power Consumption
Fuse
Dimensions
Total Weight
Lamp
Max. Ambient Temperature
Max. Housing Temperature
The information in this manual is subject to change without prior notice.
VDP250MH8
max. 230VAC/50Hz
max. 300W
F 4A, 250VAC (5 x 20mm)
470 x 370 x 330mm
20kg
1 x 230V / 250W MSD, GY9.5 socket
45°C
130°C
4
VELLEMAN
Advertenties
Inhoudsopgave
