Inhoudsopgave
Advertenties
All manuals and user guides at all-guides.com
operating a power tool. Do not use a
power tool while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use safety equipment. Always wear
eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the
switch is in the OFF position before
plugging in. Carrying power tools with your
finger on the switch or plugging in power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a rotating
part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables better
control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used.
Use of these devices can reduce dust related
hazards.
4 P
OWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better
and safer at the power rating for which it
was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source before making any adjustments,
changing accessories, or storing power
tools.
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power tool
or these instructions to operate the
power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect power
tool operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner intended
for the particular type of power tool,
taking
into
account
the
conditions
and
the
work
performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
5 S
ERVICE
a) Have your power tool serviced by a
qualified repairer using only identical
replacement parts. This will ensure that
the safety of the power tool is maintained.
6 H
-
EDGE
TRIMMER SAFETY WARNING
a) Do not expose to moisture.
b) Remove plug from the mains
immediately if the cable is damaged or
cut.
c) Keep all parts of the body away from
the cutter blade. Do not remove cut
material or hold material to be cut when
blades are moving. Make sure the
switch is off when clearing jammed
material. A moment of inattention while
operating the hedge-trimmer may result in
serious personal injury.
d) Carry the hedge-trimmer by the
handle with the cutter blade stopped.
When transporting or storing the hedge trimmer
always fit the cutting device cover. Proper
handling of the hedge-trimmer will reduce
possible personal injury caused by the cutter
blades.
e) Keep cable away from cutting area.
During operation the cable may be hidden in
shrubs and can be accidentally cut by the
blade.
f) Check that the hedge is free of foreign
objects, e.g. wire mesh.
g) For safety reasons, the socket used
to power the unit should be backed up
by a residual current device-operated
(FI) circuit-breaker which can be tripped
by a max. current of 30mA.
h) Always hold the device with both
hands.
ENGLISH
working
to
be
31
Advertenties
Inhoudsopgave
