Inhoudsopgave
Advertenties
GB
F
D
INSTRUCTIONS FOR SAFE HANDLING
Have your electric power tool repair by an
■
electrical specialist.
This tool has been manufactured in accordance with
■
current safety regulations. To avoid user accidents,
repairs should be carried out only by an electrical
specialist using only original replacement parts.
WARNING
Your reactions can be impaired by alcohol
consumption, medication, drugs, illness,
fever and tiredness. If any of these conditions
applies, do not use electrical power tools!
SPECIAL SAFETY INSTRUCTIONS
The tool must be connected to an earthed,
■
230 V power outlet and have a minimum 10 A fuse.
Do not expose the tool to rain or damp conditions.
■
Check the condition of the tool before use.
■
Do not use saw blades made of high-alloy,
■
high-speed steel (HSS).
Do not use saw blades which do not correspond to
■
the specifications given in this user manual.
Ensure that all moving parts of the blade protector
■
operate without jamming.
Use only sharp, undamaged blades and suitable
■
accessories.
Clamp workpieces firmly before starting. Never hold
■
them by hand.
For large workpieces, use the mounts supplied.
■
Do not use flanges or flange nuts whose bore is
■
larger or smaller than that of the saw blade.
Do not use damaged or deformed saw blades.
■
Use the blade only if protective devices are on hand
■
and installed.
Replace bench inserts if worn.
■
Be careful when cutting vertically.
■
Do not slow the blade by hand.
■
Attach the tool to a stable base before use.
■
The saw head must move freely and return to its top
■
starting position when released.
Do not jam the ON/OFF switch in position.
■
The tool must come to a halt within 10 seconds of the
■
switch being released.
E
I
P
NL
S
DK
N
FIN
English
In the case of dusty work, wear a face mask and
■
protective glasses, do not smoke and stay clear of
open fires.
Always attach the dust collector.
■
WARNING
Use the saw blades supplied only for wood and
wood products!
LASER BEAM SAFETY INSTRUCTIONS
Do not look into the laser beam.
■
Do not point the laser beam at people or animals.
■
Do not use the laser beam on highly reflective
■
materials. Reflected light is dangerous.
Have the laser beam repaired only by specialists.
■
Do not touch the Laser 16 lens with hard objects.
■
Clean the laser lens with a soft, dry brush.
■
DESCRIPTION
1.
Trigger switch
2.
Low guard lock lever
3.
Bench
4.
Fence
5.
Mitre cut adjuster
6.
Bevel cut adjuster
7.
Lower guard
8.
Saw head lock bolt
9.
Lock knob
10. Livetool indicator
11. Bolt holes for attachment to base
12. Depth of cut adjuster
13. Extension arm
14. Holder
15. Clamp
16. Saw spindle lock
17. Dust bag
18. Bevel lock button
19. Lock lever
20. Throat plate
21. Side stop
22. Laser
23. Laser ON/OFF switch
24. Base
25. Housing screw
26. Rubber feet
27. Handle
28. Rear Anti-Tip
7
GR
H
CZ
RUS
RO
PL
Advertenties
Inhoudsopgave
