Inhoudsopgave
Advertenties
Approved use
Exercise caution during use
Danger to life
Not applicable or not available
General information
The instructions must always be available in the national language. If
these are not available, the seller must clarify this with WÜRTH before
resale. The instructions must be made available to the user. The
equipment may only be used by persons in good physical and mental
health. They must be trained in safe use and have the necessary
knowledge, or be under the supervision of such a person. No
modifications or additions may be made to the equipment.
Emergency or rescue plans must be in place for all eventualities. It
must be possible to carry out rescue operations as quickly as possible
1.) Standards (see Table 1)
2.) Fall arrest system EN 363, type overview
A fall arrest system (Fig. 1) is composed of the individual components
shown and may only be used with tested and approved components
within the described conditions of use and for the intended purpose.
When a complete system is supplied, individual components must not
be replaced without the approval of the manufacturer. When
combining individual components, it must be ensured that the safe
function of each component and of the assembled fall arrest system is
always guaranteed, as there is a danger to life and limb in the event
of non-compliance. Only a harness EN 361 (fall arrest eyelet marked
„A") may be used in the fall arrest system. The surface to which the
anchor point is attached and the connecting elements must be able to
withstand the load. The position of the anchor point must be chosen
in such a way that the fall height is kept to a minimum. Height safety
devices (hereinafter referred to as HSG) are used exclusively for the
protection of persons who are exposed to the risk of falling during
their work (e.g. on ladders, roofs, scaffolding, etc.). The user can
move freely during the ascent and descent. Due to the integrated
spring, the lanyard made of steel rope (HSG PRO 5/10/15) / PES
webbing (HSG W102) is automatically retracted into the device.
In the event of a fall, the device locks as soon as the fall speed
reaches approx. 1.5m/s. The force that occurs in the event of a fall is
prevented by the spring. The force that occurs during a fall is reduced
16
Instructions for use
Advertenties
Inhoudsopgave
