Inhoudsopgave
Advertenties
The clock function goes out after some
seconds.
10.7 Changing the acoustic signal
1. To hear the current acoustic signal, press
and hold the
2. Repeatedly press
signal.
3. Release the
button.
11. OVEN - USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
11.1 Inserting the accessories
Tray:
Do not push the baking tray or deep pan
all the way to the back wall of the cavity.
This prevents the heat from circulating
around the tray. The food may be burnt,
especially in the rear part of the tray.
Push the tray or deep pan between the guide
bars of the shelf support. Make sure it does
not touch the back wall of the oven.
Wire shelf:
48
ENGLISH
button.
to change the
The last tone you set is the new acoustic
signal.
4. Wait 5 seconds for the setting to be
confirmed automatically.
When the appliance is disconnected from
the mains or after a power cut, the signal
tone is set back to the default one.
Put the shelf between the guide bars of the
shelf support.
11.2 Telescopic runners
You can install telescopic runners on
different shelf levels, except level 4.
Installing the telescopic runners
1. Turn the telescopic runner by
approximately 90°.
2. Slide the catch on the rear end of the
telescopic runner onto a shelf support rail.
Make sure that you put the runner on the
correct side of the oven.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
