Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1. Install the anti-tilt protection B - 393 mm
down from the top surface of the
appliance and A - 82 mm from the side of
the appliance into the circular hole on a
bracket. Screw it into the solid material or
use applicable reinforcement (wall).
A
2. You can find the hole on the left side at
the back of the appliance. Lift the front of
the appliance and put it in the middle of
the space between the cupboards. If the
space between the bench cupboards is
larger than the width of the appliance, you
must adjust the side measurement to
centre the appliance.
If you changed the dimensions of the
cooker, you must align the non-tip device
correctly.
CAUTION!
If the space between the bench
cupboards is larger than the width of the
appliance, you must adjust the side
measurement to the centre of the
appliance.
3.16 Electrical installation
WARNING!
The manufacturer is not responsible if
you do not follow the safety precautions
from Safety chapters.
This appliance is supplied with a main plug
and a main cable.
WARNING!
The power cable must not touch the part
of the appliance shaded in the illustration.
ENGLISH
41
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
