Inhoudsopgave
Advertenties
If after some tries the burner does not
light, check if the crown and its cap are in
the correct position.
In the absence of electricity you can
ignite the burner without an electrical
device. In this case approach the burner
with a flame, push the relevant knob
down and turn it to maximum position.
Keep the knob pushed for equal or less
than 10 seconds to let the thermocouple
warm up.
If the burner accidentally goes out, turn
the knob to the off position and try to light
the burner again after minimum 1 minute.
The spark generator can start
automatically when you switch on the
mains, after installation or a power cut. It
is normal.
7. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
WARNING!
Do not put the same pan on two burners.
WARNING!
Do not put unstable or damaged pots on
the burner to prevent spills and injuries.
44
ENGLISH
6.2 Burner overview
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
6.3 Turning the burner off
To put the flame out, turn the knob to the off
position
.
WARNING!
Always turn the flame down or switch it
off before you remove the pans from the
burner.
CAUTION!
Make sure that pot handles are not
above the front edge of the cooktop.
CAUTION!
Make sure that the pots are placed
centrally on the burner in order to get the
maximum stability and a lower gas
consumption.
A
B
C
D
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
