Advertenties
11.9 Electric motor and wheels
The electric motor is maintenance-free.
The wheel bearings are maintenance-free.
11.10 Storage and winter break
Store the garden shredder in a dry and
locked place that is generally free of dust.
Make sure that the machine is kept out of
the reach of children.
Only store the garden shredder in good
operating condition and with the feed
chute fitted.
Note the following points when storing the
garden shredder for extended periods
(over winter):
● Thoroughly clean all external parts of
the machine.
● Thoroughly lubricate/grease all moving
parts.
12. Transport
Risk of injury!
Before transporting, carefully read
and observe the section "For your
safety", in particular the
"Transporting the machine" section.
(
4.4)
12.1 Pulling or pushing the
garden shredder
● Hold the garden shredder at the
upper chute (1) and tilt to the rear.
● The garden shredder can be pulled or
pushed slowly (walking pace).
0478 201 9906 E - EN
12.2 Lifting or carrying the
garden shredder
At least two persons are always
required to lift and carry the
machine.
Wear suitable protective clothing;
the lower arms and upper part of
the body must be fully covered.
● 1. First person: Hold the garden
shredder at the handles on the upper
chute (1).
● 2. Second person: Hold the garden
shredder at the bar of the ejection chute
extension (2).
● Lift the garden shredder
simultaneously.
12.3 Transporting the garden
shredder on a load floor
● Secure the machine against
slipping using suitable fastening
materials. Attach ropes or straps to the
wheel carrier (1) or the feed chute (2).
13. Environmental protection
Shredding material should be
composted and not disposed of
in household waste.
20
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
21
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
14. Circuit diagram
Item
Designation
1
Mains plug
2
Switch
3
Safety switch
4
Electric motor
5
Capacitor
BR
brown
BK
black
BL
blue
YG
yellow/green
22
15. Standard spare parts
Reversible blade:
6008 702 0121
Wing blade:
6008 702 0300
GE 150, GE 250 S, GE 260 S
Blade disc assembly:
6008 700 5120
GE 250, GE 260
Blade disc assembly:
6008 700 5117
Wing blade:
6008 702 0310
Shredding blade:
6008 702 0110
23
45
Advertenties
