Advertenties
● Connect power cable connector.
● Release clip.
GE 260, GE 260 S:
● Connect the power cable connector to
the 5-pin mains plug on the machine.
10.3 Switching on the garden
shredder
There must be no shredding
material in the machine when it is
switched on as it may be expelled.
The blade disc locking device must
always be tilted back to the stop.
(
11.4)
● Connect the power cable. (
● Press the green button (1) on the switch
(illus. shows GE 150, GE 250,
GE 250 S).
The garden shredder starts up.
Only begin to feed the shredding
material once the motor has
reached the maximum speed (idling
speed).
42
10.4 Switching off the garden
shredder
Risk of injury!
Do not step into the ejection area
when switching off!
Stand to the side of the machine to
do so.
10
Beware of the work tools running
on for several seconds before
coming to a standstill after
switching off the motor.
● Press the red button (1) on the switch
(illus. shows GE 150, GE 250,
GE 250 S).
The garden shredder motor is switched off
10.2)
and braked automatically.
Only switch off the motor when
there is no longer any shredding
material in the machine. Otherwise,
the blade disc may become blocked
when operation is resumed.
10.5 Checking the rotational direction
of the blade discs
On the GE 260 and GE 260 S
models, the rotational direction of
the blade disc must be checked
before commencing work (feeding).
Risk of injury:
Always wear safety glasses when
performing the check.
● Switch on garden shredder. (
● Switch off the garden shredder.
(
10.4)
● Press the splash guard inwards and
look at the blade disc from above
through the feed opening:
11
The correct rotational direction of the
blade disc is anti-clockwise.
10.6 Changing the rotational
direction of the blade discs
In the case of incorrect rotational
direction (clockwise) of the blade
disc, the rotational direction must
be changed on the GE 260 and
GE 260 S models.
The rotational direction of the blade discs
can be changed by reversing the polarity
of the phase rotation device on the mains
plug.
● Using a screwdriver (U), turn the phase
rotation device (1) 180° clockwise or
anti-clockwise.
10.7 Shredding
● Push the garden shredder onto firm and
level ground and set down safely.
● Put on thick gloves, safety glasses and
hearing protection.
● Open the discharge flap. (
● Connect the power cable to the garden
shredder. (
● GE 260, GE 260 S: Check the
rotational direction of the blade disc and
change if necessary. (
10.3)
● Start the garden shredder. (
● Wait until the garden shredder has
reached its maximum speed (idling
speed).
12
7.3)
10.2)
10.5)
10.3)
0478 201 9906 E - EN
Advertenties
