Inhoudsopgave
Advertenties
oPeration
Safety
1.1.2 symbols, type of risk
Symbol type of risk
Injury
!
Electrocution
Burns or scalding
1.1.3 Keywords
Keyword
Meaning
DANGER
Failure to observe this information will result in serious
injury or death.
WARNING
Failure to observe this information may result in serious
injury or death.
CAUTION
Failure to observe this information may result in non-
serious or minor injury.
1.2
other symbols in this documentation / on the
appliance
Note
General notes are identified by the symbol shown on the
left.
f Read these notes carefully.
Symbol
Damage to the appliance and environment
!
Appliance disposal
f This symbol indicates that you have to do something. The ac-
tion you need to take is described step by step.
1.3
units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
www.Stiebel-eltron.CoM
2.
safety
2.1
intended use
The appliance is intended for heating domestic hot water and can
supply one or more draw-off points.
This appliance is designed for domestic use. It can be used safely
by untrained persons. The appliance can also be used in a non-
domestic environment, e.g. in a small business, as long as it is
used in the same way.
Any other use beyond that described shall be deemed inappropri-
ate. It is not permissible to heat other liquids or materials. Obser-
vation of these instructions and of instructions for any accessories
used is also part of the correct use of this appliance.
2.2
safety instructions
DANGER Scalding
During operation, the tap and safety assembly can reach
temperatures in excess of 60 °C.
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
WARNING Injury
!
The appliance may be used by children aged 8 and up
and persons with reduced physical, sensory or mental
capabilities or a lack of experience provided that they
are supervised or they have been instructed on how to
use the appliance safely and have understood the result-
ing risks. Children must never play with the appliance.
Children must never clean the appliance or perform user
maintenance unless they are supervised.
Damage to the appliance and environment
!
Protect the water lines and the safety assembly against
frost.
Note
The appliance is under pressure. During the heat-up
process, expansion water will drip from the safety valve.
If water continues to drip when the heat-up process is
completed, and if the water pressure is lower than 0.6
MPa, please inform your heating contractor.
2.3
ce designation
The CE designation shows that the appliance meets all essential
requirements according to the:
- Electromagnetic Compatibility Directive
- Low Voltage Directive
2.4
test symbols
See type plate on the appliance.
PSH UniverSal el|
21
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
