Advertenties
Status
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks, the power tool is ready for use.
1 LED blinks, the power tool is not ready for
use.
4 LEDs blink, the power tool is not ready for
use.
Battery charge status cannot be displayed while the control switch is pressed and for up to 5
seconds after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting
section.
Items supplied
Electric drill, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or
at: www.hilti.group
Technical data
Drill
Product generation
Rated voltage
Weight in accordance with EPTA Procedure 01 in-
cluding B22⁄8.0 battery
Torque
Keyless chuck clamping range
Noise information and vibration values
The sound pressure and vibration values given in these instructions were measured in accordance
with a standardized test and can be used to compare one power tool with another. They can also be
used for a preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used
for different applications, with different accessory tools, or is poorly maintained, the data can vary.
This can significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is
switched off, or when it is running but not actually being used for a job. This can significantly reduce
exposure over the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration,
for example: maintaining the power tool and accessory tools, keeping the hands warm, organization
of work patterns.
Detailed information on the versions of the EN 62841 standards applied here is to be found in
the reproduction of the declaration of conformity
Noise emission values determined in accordance with EN 62841
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
16
Meaning
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
The battery has overheated or is completely
discharged.
The power tool is overloaded or has overheat-
ed.
)
pA
)
pA
01
21.6 V
2.6 kg
≤ 9 Nm
1 mm ... 10 mm
237.
SF BT 22A
74 dB(A)
5 dB(A)
2127431
*2127431*
Advertenties
