Advertenties
Beschikbare talen
Beschikbare talen
OPERATING INSTRUCTIONS
Connecting and Disconnecting Cold compression Pad to Unit:
Line up the Breg logos on the
tubing and pad connectors.
Squeeze down gently on the
blue clips.
Push connectors together until
they make a "click" sound.
Disconnect the cold compression pad from the unit by pressing the blue clips and gently pulling
the connectors apart.
The Breg Polar Care cold compression pad may be disconnected from the unit while it's running
and connectors will seal, preventing water from flowing out of tubing. Note: Some dripping during
release is normal.
Power Adapter:
First, take the power supply and appropriate plug adapter from the
packaging.
Then with the power supply plugs folded in vertically (shown on
left), align the power supply and plug adapter (shown on right).
Make sure locking notch is on top, otherwise invert the plug
adapter.
Finally, slide the adapter down gently until it is fully recessed down
to the power supply.
Knee Pad Shown
13
Advertenties
