Inhoudsopgave
Advertenties
19. STOP OF THE PUMPS
Motor stop may occur in the following ways:
- In "manual" by releasing the MANUAL button (after the time set in parameter "Turn-Off MANUAL ");
- In "automatic" mode when there is no consensus from the control inputs or by pressing "0" button;
- In "automatic" mode by pressing the "STOP" button from Remote-App (if active);
- Turning the main interlock switch to "0" position.
20. MAINTENANCE
FULL-APP² does not require any routine maintenance provided that their working limits are observed. Any maintenance
operations must be performed by qualified and experienced personnel, in compliance with the safety regulations in force.
DANGER!
Make sure that the control panel is disconnected from the power supply before performing any maintenance
operations.
21. WASTE DISPOSAL
After the control panel has been installed and started, the customer must provide for the appropriate elimination/disposal
of the waste materials according to the legislation locally in force. If the control panel or parts of it must be taken out of
service and dismantled, follow local regulations regarding sorted waste disposal. Refer to the appropriate recycling
centres.
CAUTION: Contamination of the environment with hazardous substances such as battery acid, fuel, oil,
plastic, copper, etc., may cause serious damage to the environment and endanger people's health.
22. SPARE PARTS
Always state the exact model identification number and construction number when requesting technical information or
spare parts from our sales and service centre.
Use only original spare parts when replacing any faulty components.
The use of unsuitable spare parts can cause malfunctions, personal injury and damage to property.
54
Advertenties
Inhoudsopgave
