Inhoudsopgave
Advertenties
To proceed and set all the parameters of the operating mode PAUSE/WORK press the button
With the parameter "Starting cycle Pause/Work" is possible to select if the operating program
Program
PAUSE/WORK
"PAUSE/WORK" must start the operating cycle from the pause time or work time.
The "X" indicates the setting of the parameter to modify.
0=PAUSE
1=WORK
Starting cycle
Pause/Work
X
Factory default setting: 0.
To move to the next horizontal parameter press the button
With the parameter "Pause Time P1" is possible to set the duration of the pause time in the
operation of the pump P1.
Pause Time
The "X" indicates the setting of the parameter to modify.
P1
XXXmin
The range of value is from 1 to 999 minutes.
Factory default setting: 200.
To move to the next horizontal parameter press the button
With the parameter "Work Time P1" is possible to set the duration of working time in the
operation of the pump P1.
Work Time
The "X" indicates the setting of the parameter to modify.
P1
XXXmin
The range of value is from 1 to 999 minutes.
Factory default setting: 100.
To move to the next horizontal parameter press the button
With the parameter "Pause Time P2" is possible to set the duration of the pause time in the
operation of the pump P2.
Pause Time
The "X" indicates the setting of the parameter to modify.
P2
XXXmin
The range of value is from 1 to 999 minutes.
Factory default setting: 200.
To move to the next horizontal parameter press the button
With the parameter "Work Time P2" is possible to set the duration of working time in the
operation of the pump P2.
Work Time
The "X" indicates the setting of the parameter to modify.
P2
XXXmin
The range of value is from 1 to 999 minutes.
Factory default setting: 100.
:
Starting cycle
Pause/Work
X
:
Pause Time
P1
XXXmin
:
Work Time
P1
XXXmin
:
Pause Time
P2
XXXmin
Pause Time
P1
XXXmin
Work Time
P1
XXXmin
Pause Time
P2
XXXmin
Work Time
P2
XXXmin
:
33
Advertenties
Inhoudsopgave
