Inhoudsopgave
Advertenties
ASSEMBLING THE HEATER
The manufacturer is not responsible for any harm or damage if attention is not
paid to the points described above.
The use of this product and the elements required for that purpose is entirely at
the end user's own risk.
GFA1015 BAFFLE INSTALLATION INTRODUCTION
To protect your floor ALWAYS mount the baffle to the front outlet of the heater.
1.
2.
3.
4.
Baffle
5.
GAS REQUIREMENTS
Use propane, butane or LGP only. See rating label on the appliance.
•
4
30
Take out of the heater from the box. The baffle is installed under the air-out-
put as below arrow part
Anti-clockwise unscrew the 2 screws for the baffle.
Install the baffle as below picture.
Clockwise tighten the 2 screws.
Finished status
The appliance requires approved gas hose in <150 cm length and a gas regu-
lator. The hose and regulator assembly must conform to local standard codes.
Advertenties
Inhoudsopgave
