Advertenties
▶
Make sure that the chip collector is empty. You can see the level of fill in the viewing window in the
chip collector (1).
As soon as you see dust and chips flying out of overflow opening (2) in the flap, empty the
chip collector (3).
▶
Before using the product, make sure that the flap of the chip collector is always closed.
Scaffold hook
The product has a scaffold hook that you can use to hook the product briefly to a railing, for example.
To use the scaffold hook, flip the scaffold hook 180° straight up.
When flipped out, the scaffold hook can be pivoted approx. 30° forward to the transport
position. Before flipping the scaffold hook back in, pivot the scaffold hook back approx. 30° to
the initial position.
Care and maintenance
WARNING
Risk of injury with battery inserted !
▶
Always remove the battery before carrying out care and maintenance tasks!
Care of the product
• Carefully remove stubborn dirt.
• Carefully clean the air vents, if present, with a dry, soft brush.
• Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone
as these can attack the plastic parts.
• Use a dry, clean cloth to clean the contacts of the product.
Care of the Liion batteries
• Never use a battery with clogged air vents. Clean the air vents carefully using a dry, soft brush.
• Avoid unnecessary exposure of the battery to dust and dirt. Never expose the battery to high levels
of moisture (e.g. by being dipped in water or left in the rain).
If a battery has been soaked by moisture, treat it as a damaged battery. Isolate it in a non-flammable
container and consult Hilti Service.
• Keep the battery free of extraneous oil and grease. Do not permit dust or dirt to accumulate
unnecessarily on the battery. Clean the battery with a dry, soft brush or a clean, dry cloth. Do not
use cleaning agents containing silicone as these can attack the plastic parts.
Do not touch the contacts of the battery and do not remove the factory-applied grease from the
contacts.
• Use only a slightly damp cloth to clean the housing. Do not use cleaning agents containing silicone
as these can attack the plastic parts.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals and make sure that
they all function correctly.
• Do not use the product if signs of damage are found or if parts malfunction. Immediately have the
product repaired by Hilti Service.
• After cleaning and maintenance, install all guards and protective devices and check that they are
in full working order.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables.
Spare parts, consumables and accessories approved by Hilti for use with your product can be
found at your Hilti Store or online at: www.hilti.group
32
2360040
*2360040*
Advertenties
