Advertenties
▶
Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame.
This can lead to explosions.
▶
Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive
objects. This can damage the battery and also cause material damage and personal injury.
▶
Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶
Use only chargers and power tools approved for the specific battery type. Read and follow the
relevant operating instructions.
▶
Do not use or store the battery in explosive environments.
▶
If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly
visible and where there is no risk of fire, at an adequate distance from flammable materials. Allow
the battery to cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti
Service or read the document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion
batteries.
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by
scanning the QR code at the end of these operating instructions.
Description
1
Product overview
Auxiliary handle
@
Switch-on interlock
;
On/off switch
=
Main grip
%
Release button, battery
&
Battery status indicator
(
Battery
)
Chip collector
+
Chip collector fill-level and temperature
§
indicator window
Pivoting guard operating lever
/
Base plate
:
Pivoting guard
∙
Intended use
The product described is a cordless circular saw. It is designed for operation with two hands and
for cutting metals and metal-like materials, for example steel, stainless steel, aluminum or other non-
ferrous metals.
▶
Use only saw blades approved for the product that comply with the specifications set out in the
technical data (e.g. diameter, speed of rotation, thickness, material, etc...). Grinding and cut-off
wheels and saw blades made of highly alloyed high speed steel (HSS) are not permissible.
▶
Saw only flat workpieces that offer a big enough contact surface to accommodate the whole of the
base plate.
▶
Do not use the saw to cut wood or wood-like materials, plastics, gypsum board, gypsum fiberboard
and composite materials.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For this product, Hilti
recommends the use of the batteries stated in the table at the end of these operating instructions.
26
Direction-of-rotation arrow
$
Parallel guide
£
Cutting line indicator
|
Viewing window
¡
Scaffold hook
Q
Clamp for parallel guide
W
Spindle lock button
E
Clamping lever for cutting depth adjust-
R
ment
Hex key
T
Mounting flange
Z
Clamping flange
U
Clamping screw
I
2360040
*2360040*
Advertenties
