Download Inhoudsopgave Inhoud Print deze pagina

Starting Therapy; Stopping Therapy - ResMed AirCurve 10 VAuto Handleiding

Verberg thumbnails Zie ook voor AirCurve 10 VAuto:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

Recommended water type (France only)
The following water types are recommended for use in the humidifier:
Boiled tap water, cooled to room temperature
Distilled water
Bottled water (with a low mineral content).
Note: Do not use non-sterile demineralised water for domestic use.

Starting therapy

1. Fit your mask.
2. Press Start/Stop or breathe normally if SmartStart
You will know that therapy is on when the Sleep Report screen is displayed.
The screen will go black automatically after a short period of time. You can press Home or the dial to
turn it back on. If power is interrupted during therapy, the device will automatically restart therapy
when power is restored.
The AirCurve 10 device has a light sensor that adjusts the screen brightness based on the light in
the room.

Stopping therapy

1. Remove your mask.
2. Press Start/Stop or if SmartStart is enabled, therapy will stop automatically after a few seconds.
The Sleep Report now gives you a summary of your therapy session.
Humidifier–Indicates if your humidifier is working properly:
Humidifier working.
Humidifier might be faulty, contact your care provider.
The pressure bar shows the inspiratory and expiratory pressures in green. The
green bar will expand and contract as you breathe in and out.
Usage hours–Indicates the number of hours of therapy you received last
session.
Mask Seal–Indicates how well your mask sealed:
Good mask seal.
Needs adjusting, see Mask Fit.
is enabled.
English
5

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Aircurve 10 s

Inhoudsopgave