Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
successful communication.
Conformément à la réglementation d'Industrie
Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un
gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de
réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.)
ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication
satisfaisante.
This equipment should be installed and operated
with a minimum distance 20cm between the
radiator and your body.
Cet équipement doit être installé et utilisé à une
distance minimale de
20 cm entre le radiateur et votre corps
Safety Instructions
These instructions are intended to ensure that
user can use the product correctly to avoid danger
or property loss.
Laws and Regulations
The device should be used in compliance with
local laws, electrical safety regulations, and fire
prevention regulations.
Transportation
Keep the device in original or similar packaging
while transporting it.
Keep all wrappers after unpacking them for
future use. In case of any failure occurred, you
need to return the device to the factory with the
original wrapper.
Transportation without the original wrapper may
result in damage on the device and the company
shall not take any responsibilities.
Do not drop the product or subject it to physical
shock. Keep the device away from magnetic
interface.
Power Supply
The input voltage for the device should meet the
Limited Power Source (5 VDC, 2 A) according to
the IEC61010-1 standard. Please refer to
technical specifications for detailed information.
The battery charger is included in the package.
The input voltage for the supplied battery
charger should meet the Limited Power Source
(5 VDC, 2 A).
Make sure the plug is properly connected to the
power socket.
DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards
caused by overload.
Battery
Improper use or replacement of the battery may
result in explosion hazard. Replace with the
same or equivalent type only. The battery type is
18650 with the protection board, and the
battery size should be within 19 mm × 70 mm.
The rated voltage and capacity are 3.6 VDC/3.35
Ah (12.06 Wh). Dispose of used batteries in
conformance with the instructions provided by
the battery manufacturer.
Do not charge other battery types with the
supplied charger. Confirm there is no flammable
material within 2 m of the charger during
charging.
For long-term storage of the battery, make sure
it is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
DO NOT place the battery near heating or fire
source. Avoid direct sunlight.
DO NOT swallow the battery to avoid chemical
burns.
DO NOT place the battery in the reach of
children.
The battery can not be charged with external
power source directly.
The device can not be charged, please use the
supplied charger to charge the battery.
Please purchase the adapter by yourself. The
using environment of the adapter should be
consistent with that of the device.
Maintenance
If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
If the equipment is used in a manner not
.
specified by the manufacturer, the protection
provided by the device may be impaired.
Clean the lens with soft and dry cloth or wiping
paper to avoid scratching it.
Using Environment
Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -30 °C to 55 °C (-22 °F to
131 °F), and the operating humidity shall be 95%
or less, no condensing.
DO NOT expose the device to extremely hot, cold,
dusty, corrosive, saline-alkali, or damp
environments.
This device can only be safely used in the region
below 2000 meters above the sea level.
Avoid equipment installation on vibratory
surface or places subject to shock (neglect may
cause equipment damage).
Do not aim the lens at the sun or any other
bright light.
Emergency
If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the
power cable, and contact the service center.
Laser
substances. Before enabling the light supplement
function, make sure no human or inflammable
substances are in front of the laser lens. Do not
place the device where minors can fetch it.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road,
Xixing Subdistrict,Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products
might be subject to export controls in various
countries or regions, including without limitation,
the United States, European Union, United
Kingdom and/or other member countries of the
Wassenaar Arrangement. Please consult your
professional legal or compliance expert or local
government authorities for any necessary export
license requirements if you intend to transfer,
export, re-export the thermal series products
between different countries.
7
When any laser equipment is in use,
make sure that the device lens is not
exposed to the laser beam, or it may
burn out. The laser radiation emitted
from the device can cause eye injuries,
burning of skin or inflammable
Deutsch
Advertenties
Inhoudsopgave
