Advertenties
Beschikbare talen
Beschikbare talen
2. PACKAGE CONTENTS
The package contains:
fig. 2 a Connect CRP device
3. ConneCt CRP DeVICe InStALLAtIon
B
AttentIon
• For proper control of the room temperature it is advisable to install the
sources, drafts or particularly cold walls (thermal bridges).
• In order to ensure electrical safety it is mandatory to secure the body of the device to the wall plate
• Installation and the electrical connection must be done by qualified personnel in compliance with the
applicable laws.
• Before making any connections ensure that the power supply is disconnected.
The device is intended for mounting in standard flush-mounted (or wall-mounted) junction boxes with two or three
modules or directly on the wall.
To install the device, proceed as follows:
1. Detach the back panel of the Connect CRP by pressing the bottom catch, taking care not to damage the plastic.
Avoid any pressure on the display, to prevent it from being damaged.
86
EN
fig. 3 230 Vac - 24 Vdc power supply
cod. 3542B390 - Rev 04 - 01/2023
fig. 4 screws/plugs kit
fig. 6
fig. 5 an instruction manual
away from heat
Connect CRP
Advertenties
