Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4
Installation
4.1
General installation information
A residual current circuit breaker must be provided as electrical protection for the system.
The system's control unit must be positioned in such a way as to prevent any unauthorised use.
Consequential damage can occur in the building if the system is switched off accidentally.
Assembly sequence
(1)
Installation of the technical module.
(2)
Connection of wastewater inlet and the pressure
pipe via which the wastewater is pumped out.
(3)
Installation of the chamber module
(not described in these instructions).
4.2
Make the pressure pipe connection
The pressure pipe connection is made of PE. Depending on the version, the connection is DN50 or DN 80 (OD=90 mm).
Version A
KESSEL recommends the connection of standard PE-HD electro-welded sock-
ets.
Version B
Alternatively, the pressure pipe connection can be connected with suitable clamp
connectors (e.g. KESSEL accessories art. no. 28090/28091/28092).
010-992_03
(4)
(5)
Pumping station / Installation and operating manual
Installation of cable conduit, ventilation,
control unit and electrical connection.
Commissioning
37 / 144
Advertenties
Hoofdstukken
Inhoudsopgave
