Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
This system uses level sensors for level measurement as standard. Pumping is activated when the defined fill level has been
reached. Pumping is ended after the fill level has fallen again by an appropriate amount.
If two pumps are connected, they are switched on either individually or together, depending on the fill level and positioning of
the level measurement.
Design
The system comprises the technical module (1) and cham-
ber module (2).
The technical module holds the pump(s) and the level mea-
surement. Different chamber elements (intermediate sec-
tions, taper etc.) can be mounted on the technical module.
Technical module and chamber module together form the
system.
System with fittings made of polymer
(1)
Chamber module
(2)
Technical module
(3)
Pre-scored area for ventilation pipe DN 100
(4)
Flushing connection 1 1/2" inner thread
(5)
Pressure pipe connection DN 50 / DN 80
(6)
Backflow preventer with ventilation device
(7)
Level measurement (level sensor)
(8)
(9)
Access steps
(10)
(11)
(12)
Shut-off valve made of polymer
(13)
Pre-scored area for cable conduit
010-992_03
Base elbow
Pump
Inlet
Pumping station / Installation and operating manual
29 / 144
Advertenties
Hoofdstukken
Inhoudsopgave
