Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
● Adding an outdoor sensor
Note: You can connect up to three outdoor sensors to the radio-controlled
weather station. Additional outdoor sensors are available from the order service.
□
Briefly press the CH button 16 .
The radio channel changes. The currently selected channel is indi
cated in the channel display icon 54 (see Fig. E).
□
Open the battery compartment 20 on the back of the outdoor sensor by
sliding the battery compartment cover 21 in the direction indicated by the
arrow.
□
Use a thin object if necessary.
□
Set the channel selection switch 19 to the same channel.
□
Keep the CH button 16 pressed until the RF signal symbol 55 lights up.
□
Use a thin object if necessary.
□
Press the TX button 18 to manually establish the connection.
Reception is established. The temperature and the air humidity are
indicated on the radio-controlled weather station and on the outdoor
sensor.
□
Close the battery compartment 20 on the back of the outdoor sensor by sliding
the battery compartment cover 21 in the opposite direction to that indicated by
the arrow.
● Temperature alarm
Only one temperature range can be configured for each outdoor sensor. When
the outdoor sensor measures a value below the set temperature range, an alarm
sounds on the radio-controlled weather station.
□
Press the ALERT button 13 .
The temperature alarm is activated and the icon 53 (see Fig. E) is
lit.
□
Press and hold the ALERT button 13 for 2 seconds.
Operation
GB/IE/NI
27
Advertenties
Hoofdstukken
Inhoudsopgave
