Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operation
□
Press the arrow up 11 and arrow down button 12 to set the desired minute.
□
Confirm your selection by pressing the SET button 10 .
The time of one alarm function has been configured.
Note: The alarm function must be manually activated to become active (see
section "Activating/deactivating the alarm function").
● Activating/deactivating alarm functions
The bell icons 45 42 indicate whether an alarm function is activated or deacti
vated (see Fig. D).
□
Press the SET button 10 to toggle between the two alarm functions.
□
Press the arrow up button 11 to activate the alarm function.
The respective alarm bell icon is displayed.
□
Press the arrow down button 12 to deactivate the alarm function.
The respective alarm bell icon is no longer displayed.
● Snoozing/switching off the alarm function
The alarm of the alarm function sounds at the set time.
□
Briefly press the SNOOZE/LIGHT button 3 to activate the snooze function.
The snooze icon 46 (see Fig. D) starts to flash and the alarm
sounds again in 5 minutes.
□
Press any button on the back of the radio-controlled weather station.
The alarm function stops.
● Switching the display of the added outdoor
sensors
□
Press the CH button 16 .
The channel display 54 shows the channel of the outdoor sensor.
Once you have added the outdoor sensor to the selected channel, the data of the
outdoor sensor is displayed.
26
GB/IE/NI
Advertenties
Hoofdstukken
Inhoudsopgave
