Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTaLLaTION
Installation
10.2 Installation options
10.2.1 Undersink installation, non-pressurised, with non-
pressurised tap
www.stiebel-eltron.com
10.2.2 Appliance installation
Note
The wall must have sufficient load bearing capacity.
f Mount the appliance on the wall.
f Undo the cover fixing screws by two turns.
f Undo the snap fastener using a screwdriver.
f Remove the appliance cover with the heater towards the
front.
EIL Trend |
11
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
