Overview
1. Important recommendations
1.1. Safety instructions
Installation and service work on thermodynamic water heaters can be hazardous due to high pressures and
live parts.
Thermodynamic water heaters must be installed, commissioned and maintained by trained and qualified
personnel only.
1.2. Transport and storage
One side of the product can be tilted at 90°. This side is clearly indicated on the product packaging.
Tilting the product onto the other sides is prohibited. We recommend that you pay particular
attention to these instructions. We shall not be liable for any defect of the product resulting from
transport or handling of the product contrary to our recommendations.
2. Content of the packaging
Water heater
Installation
Product overview
Use
Maintenance
1 Instructions
1 Bag each containing a dielectric connection
with 2 seals to be installed on the hot water
connection
1 Condensate drain pipe (2m)
1 ground hook with screws
1 valve to be installed on the cold water connection
(not to be used in France and Belgium)
1 seal + 1 ¾" brass cap
4 adjustable feet
Warranty
EN
45