Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Translation of the original instructions
NO WARRANTY FOR THE BATTERY
GYSPACK contains a high performance battery, which imperatively needs to be recharged after each use. If this condi-
tion is not respected, within 24 hours the battery gets sulphated. This causes an irreversible deterioration of the battery.
For this reason, the battery of the GYSPACK, which is expensive, is not under warranty, because its conservation de-
pends on its use.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
BATTERY REPLACEMENT
1
Product
GYSPACK 400
GYSPACK 600
To replace the battery :
•
First the booster must be disconnected form the power supply.
•
The back panel must be unscrewed (9 screws) and removed.
•
Once the back panel is removed, the battery front appears (cf illustration). The battery is connected to the GYSPACK
at two points : at the - terminal
the connection between the battery and the GYSPACK.
When putting a new battery, make sure to observe the polarities of both the battery and the
GYSPACK. Terminal - on the left, terminal + on the right (cf illustration). Put the 2 screws and
washers back, tighten the nuts (recommended torque wrench 4 N.m).
•
Place the booster's backpanel screws back on.
14
GYSPACK 400 / 600
Battery
Type
6FM - 18
Lead-acid
battery
6FM - 22
1
and at the + terminal
Voltage (V) Capacity (Ah) Dimensions (cm) Battery ref
18
12
22
2
. To remove the battery, remove the screw that enables
EN
2
33 x 14 x 43
53139
33 x 20 x 43
53151
Advertenties
Inhoudsopgave
