Advertenties
Beschikbare talen
Beschikbare talen
M71L
• Check beforehand that there is sufficient space on the other side for the drill head to come out
(fig. 2, page 4).
• Bear in mind the weight of the monitor. Provide reinforcement if necessary (larger washers or
plates).
• Make sure you can lay the connection cable to the monitor.
Choosing the installation location (fig. a, page 7)
➤ Place the monitor on the monitor bracket.
➤ Position the monitor and the attached monitor bracket provisionally.
➤ Mark the outlines of the corners of the support base on the dashboard.
➤ Take the monitor off the monitor bracket.
Screwing the monitor bracket onto the dashboard (fig. b, page 7)
➤ Hold the support base within the outlines marked beforehand.
➤ Fix the monitor bracket in place using suitable screws.
Fastening the monitor
➤ Set the monitor on the monitor bracket and secure it with the knurled nut (fig. a, page 7).
6.3
Connecting the monitor electrically
The circuit diagram for the LCD monitor can be found in fig. d, page 8.
No.
1
2
3
4
5
6
7
8
EN
Description
Monitor
20-pin socket
Monitor line
20-pin plug
12 – 24 V positive cable (red): connected to the positive terminal of the
ignition (connected positive, terminal 15) or the positive terminal of the bat-
tery (terminal 30)
Earth cable (black): connected to the negative terminal of the voltage
source
Cable (green): control input for video input AV1,
such as for connecting the reversing light
Cable (white): control input for video input AV2,
such as for the side camera
Installing the LCD monitor
15
Advertenties
