Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
If the appliance is not connected to your home net-
work, it functions as an appliance with no network con-
nection and can still be operated via the display.
Tips
¡ Please consult the documents supplied by
Home Connect.
¡ Please also follow the instructions in the Home Con-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 24
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
¡ If you need your device's MAC address to connect
to your home network, you can find this next to the
rating plate. → Page 35
8.1 Automatically connecting the appliance
to the WLAN home network (Wi-Fi)
If your router has a WPS function, you can connect the
appliance to your WLAN home network (Wi-Fi) automat-
ically.
Note: The appliance cannot be switched on during the
connection process. Press
Requirements
¡ Wi-Fi on the router is activated.
¡ The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
¡ The Home Connect app is installed on your mobile
device.
¡ The appliance and the light are switched off.
Press and hold the button until LED 7 flashes in
1.
the LED display.
Press
.
2.
a LED 1 and LED 7 flash in the LED display.
3.
Press the WPS button on the router within the next
2 minutes.
a If the connection has been established, the appli-
ance automatically connects to the Home Connect
app. LED 3 and LED 7 flash in the LED display.
If no connection can be established, the appliance
4.
automatically switches to the manual connection to
the home network, LED 2 and LED 7 flash in the
LED display. Log the appliance manually into the
home network or press
gin.
On your mobile device, follow the instructions for
5.
automatic network login.
a The login process is complete when LED 7 stops
flashing and remains continuously lit.
8.2 Manually connecting the appliance to
the WLAN home network (Wi-Fi)
Note: The appliance cannot be switched on during the
connection process. Press
to cancel the process.
in order to restart the lo-
to cancel the process.
Requirement: The appliance and the light are switched
off.
1.
Press and hold the button until LED 7 flashes in
the LED display.
Press
twice to start logging into your home net-
2.
work manually.
a LED 2 and LED 7 flash in the LED display.
Follow the instructions in the app.
3.
a If the connection has been established, the appli-
ance automatically connects to the Home Connect
app. LED 3 and LED 7 light up in the LED display.
On your mobile device, follow the instructions for
4.
manually logging into your network.
a The login process is complete when LED 7 stops
flashing and remains continuously lit.
8.3 Connecting the appliance to the
Home Connect app
Requirements
¡ The Home Connect app is installed on your mobile
device.
¡ The Home Connect app is opened.
Press and hold the
1.
flash in the LED display.
2.
Follow the instructions for the Home Connect app
on the mobile device.
a The login process is complete when LED 7 stops
flashing and remains continuously lit.
8.4 Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect has
been set up and whether the appliance is connected to
your home network.
8.5 Resetting the connection
Saved connections to the home network and to
Home Connect can be reset.
Press and hold and
▶
LED display.
a An audible signal sounds.
8.6 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip: For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com
Home Connect en
button until LED 3 and LED 7
until LED 7 goes out in the
31
Advertenties
Hoofdstukken
Inhoudsopgave
