Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en Home Connect
To set circulating-air mode (non-regenerable fil-
‒
ter), press
/
until LED 2 lights up in the LED
display.
To set circulating-air mode (non-regenerable fil-
‒
ter), press
/
until LED 3 lights up in the LED
display.
To convert the electronic control back to opera-
‒
tion without the air recirculation filter, press
until LED 1 lights up on the LED display.
To save the setting, press and hold and for ap-
2.
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
To cancel the setting, press .
a A signal tone sounds as soon as the selected set-
ting is saved.
7.16 Resetting the saturation indicator
After cleaning the grease filter or after changing the
odour filter, the saturation indicator can be reset.
Requirements
¡ After the appliance has been switched off, LED 1
flashes in the LED display for the grease filter satura-
tion display and/or LED 2 flashes for the saturation
indicator for the odour filter.
¡ A repeated signal tone sounds.
Press
.
▶
a The saturation indicator is reset.
7.17 Switching on the lighting
The lighting can be switched on or off independently of
the ventilation.
Press
.
▶
Note: Colour temperature settings are available in the
Home Connect app provided the appliance has this
function.
7.18 Switching off the lighting
Switch off the lighting with
▶
7.19 Setting the brightness
Press and hold down .
▶
Note: Colour temperature settings are available in the
Home Connect app provided the appliance has this
function.
8 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
30
/
.
7.20 Switching on the button tone
The button tones can be switched on.
Requirement: The appliance is switched off.
Press and hold
and
1.
a In the LED display, the LED for the setting that is
currently selected lights up.
Press
or until LED 1 lights up in the LED dis-
2.
play.
To cancel the setting, press .
To save the setting, press and hold
3.
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
a A signal tone sounds as soon as the selected set-
ting is saved.
7.21 Switching the button tone off
The button tones can be switched off.
Note: Signal tones for the appliance are always
switched on and cannot be switched off.
Requirement: The appliance is switched off.
Press and hold
and
1.
a In the LED display, the LED for the setting that is
currently selected lights up.
Press
or until LED 2 lights up in the LED dis-
2.
play.
To cancel the setting, press .
3.
To save the setting, press and hold
prox. three seconds.
Or wait approx. 10 seconds until the setting is
saved automatically.
a A signal tone sounds as soon as the selected set-
ting is saved.
7.22 Resetting the appliance to the factory
settings
Requirement: If you reinstall the appliance after disas-
sembly, you will need to reset the appliance to the fact-
ory settings so that the reference movement is carried
out correctly.
Press and hold
and
▶
a The reference movement is started and determines
the correct actual position of the appliance with a
reference switch.
To be able to use Home Connect, you must first set up
the connection to the WLAN home network (Wi-Fi
to the Home Connect app.
¡ Automatically connecting appliance to WLAN home
network (Wi-Fi) → Page 31
¡ Connecting appliance to WLAN home network (Wi-
Fi) manually → Page 31
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
for approx. three seconds.
and
for ap-
for approx. three seconds.
and
for ap-
and
.
1
) and
Advertenties
Hoofdstukken
Inhoudsopgave
