Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pressu-
res.
Installation Instructions
•
The fitting must be installed, flushed and tested after
the valid norms!
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Rate of flow by 0,3 MPa:
Handspray flow rate:
Aerator flow rate:
anti-pollution function
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
English
Symbol description
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
max. 80°C
65°C
10 l/min
11 l/min
Assembly see page 31
Maintenance (see page 34)
The non return valves must be checked
regularly according to DIN EN 1717 in
accordance with national or regional
regulations (at least once a year).
To adjust the hot water limiter on single lever
mixers, please see page 33. No adjustment
is necessary when using a continuous flow
water heater.
Do not use silicone containing acetic acid!
Dimensions (see page 34)
Spare parts (see page 36)
Operation (see page 35)
Cleaning (see page 34) and
enclosed brochure
If the waterflow drops, clean the filter
located between hose and handspray.
Test certificate (see page 35)
Advertenties
Inhoudsopgave
Gerelateerde Handleidingen voor Hansgrohe Steel 35807800
Gerelateerde Producten voor Hansgrohe Steel 35807800
- Hansgrohe Crometta 85 Vario/Unica'Crometta Set 27763000
- Hansgrohe Crometta 85 Vario/Unica'Crometta Set 27764000
- Hansgrohe Crometta 85 Multi/Unica'Crometta Set 27767000
- Hansgrohe Focus E2 Comfort Set 31933000
- Hansgrohe Metris S 31464000
- Hansgrohe Metris S 31664000
- Hansgrohe ShowerSelect S 15741000
- Hansgrohe Metris S 31446000