Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SYMPTOM
No sound
Poor sound quality
No sound from a device
connected by the
back-up audio cable
Poor sound quality from
a device connected by
audio cable
Action button doesn't
change the noise
cancelling mode
TROU B LE S HO OT ING
SOLUTION
Power on the headphones and charge the battery.
Check the state of the status light (see page 32).
Slide the Power/Bluetooth switch to the right and release to hear
the connected device. Make sure you are using the
correct device.
Move your mobile device closer to the headphones and away
from any interference or obstructions.
Use a different music source.
If two mobile devices are connected, pause your other
device first.
If two mobile devices are connected, move the devices within
range of the headphones (30 ft or 9 m).
Try a locally stored music or video file on your mobile device.
If in a windy environment, create a custom mode with wind
blocking enabled in the Bose app. To access this option, tap
Modes on the main screen (page 24)
Use a different music source.
Connect another mobile device (see page 28).
Disconnect the second device.
Move your mobile device closer to the headphones and away
from any interference or obstructions.
Try a locally stored music or video file on your mobile device.
Secure the ends of the back-up audio cable.
Increase the volume on your headphones, your mobile device
and music source.
Connect another device (see page 28).
Secure the ends of the back-up audio cable.
Connect another device (see page 28).
Make sure your headphones are powered on.
Use the Bose app to change the noise cancelling mode.
|
4 0
E N G
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
