GB
10.1 Unpacking
WARNING!
The appliance is heavy. Always handle with at least two persons.
Keep all packaging materials out of children´s reach and dispose them in an environ-
mentally friendly manner.
Take the appliance out of the packaging.
Remove all packaging materials.
10.2 Environmental conditions
the temperature inside the appliance and its energy consumption. Do not install the appli-
ance near other heat-emitting appliances (ovens, refrigerators) without isolation.
10.3 Space requirement
Required space when door is opened (Fig. 10.3):
Width
in mm
W1
W2
W3
830 869
1424
10.4 Ventilaton cross-section
safety reasons, the information of the required venti-
lation cross sections must be observed (Fig. 10.4).
10.5 Aligning the appliance
The appliance should be placed on a at and solid sur-
face.
1. Tilt the appliance slightly backwards (Fig. 10.5).
2. Set the feet to the desired level.
3. The stability can be checked by alternately bump-
ing on the diagonals. The slightly swaying should
be the same in both directions. Otherwise the
frame can warp; possible leaking door seals are
the result. A low tendency to the rear facilitates
the closing of the door.
Depth
Distance to wall
in mm
in mm
D1
D2
600
885
D3
D4
1034 1130
10- Installation
D5
50
1.
max 45°
D5
D1 D2 D3D4
W1
W2
W3
>10 cm
>10 cm
2.
3.
10.3
10.3
10.4
10.5
31