Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• Cut off the mains cable and discard it.
Before first use
Warning! Refer to the Safety chapters.
Remove all packaging, both inside and
outside the oven, before using the appli-
ance. Do not remove the rating plate.
Caution! To open the oven door, always
hold the handle in the centre.
Setting the time
You must set the time before you operate
the oven.
When you connect the appliance to the electri-
cal supply or after a power cut, the indicator for
the Time function flashes.
Press the + or - button to set the correct time.
www.zanussi.com
All manuals and user guides at all-guides.com
• Remove the door catch to prevent children
After approximately five seconds, the flashing
stops and the display shows the time of day
you set.
the same time.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
Preheating
1. Set function
2. Run an empty oven for 45 minutes.
3. Set function
4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity
surface. Accessories can become more hot
than in normal use. During this period an odour
and smoke can be emitted. This is normal.
Make sure the airflow is sufficient.
and pets to get closed in the appliance.
When you change the time, you must not
set the Duration
or End
Caution! Do not use abrasive cleaning
agents! This can damage the surface.
and maximum temperature.
and maximum temperature.
function at
19
Advertenties
Hoofdstukken
Inhoudsopgave
