Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
f) Bluetooth®-Operation
To permit best phone reception and keep electromagnetic irradiation in the vehicle as low as
possible, always use an outside aerial in mobile phone operation.
In Bluetooth® operation, the SD tuner can be used as hands-free system for mobile phones and/or as
playback device for Bluetooth®A2DP audio streaming. Before transmission between your mobile phone or
Bluetooth® device and the SD tuner is possible, however, both devices must be coupled. This process is
called "Pairing".
Pairing
• Switch your Bluetooth® device on and activate the pairing mode here (see instructions of the correspon-
ding device). The device scans for Bluetooth® devices in the reception range.
• Press the button MODE / PAIR (19) until the display shows PAIRING.
• When the SD tuner was found, your Bluetooth® device shows the name CarBT.
• Enter the password 0000 to couple the two devices.
• After successful pairing, the display (5) indicates the Bluetooth® symbol .
• If pairing was not successful, try repeating the process. The CarBT device may have to be deleted in your
mobile phone first (see mobile phone instructions).
• To remove or create a connection, you may also select the item CON BT (connect) or DISCON BT (dis-
connect) in the main menu (see "Menu Settings").
Only one Bluetooth® device at a time can be coupled with the SD tuner. If there is an active
Bluetooth® connection already, this connection must be interrupted first.
If the SD tuner or Bluetooth® device with which there is an active connection is switched off or
removed from the range, the connection is interrupted. When switching on again or when the
Bluetooth® device returns into the SD tuner range again, the connection is automatically re-esta-
blished. The SD tuner display shows the Bluetooth® icon again.
To permit this automatic establishment of connection, this function may have to be activated at
the Bluetooth® device (read about this in your Bluetooth® device's instructions).
Initiating a call with manual number input
• Push the button (25) at the remote control to enter the phone mode.
• Dial the desired number with the number keys 0 to 9, * (23) and # (27) at the remote control.
• The dialled number appears in the display.
• Push the button (25) again to dial.
Push the button
to delete the last digit entered.
Push the button
number to delete the entire number.
/ BND / LOU (20) or BND / AMS /
/ BND / LOU (20) or BND / AMS /
(11) briefly while entering the number
(11) for a longer time while entering the
61
Advertenties
