Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
b) Connecting the LINE Outputs
The SD tuner has LINE outputs for connecting a power amplifier.
For the connection of the cinch sockets only use the shielded cinch wires. Use of any other
cables may cause interferences.
Keep the distance of the cables as short as possible.
Do not place the cables near other cables to avoid interferences in the cables.
To avoid distortions or mismatching that could damage the device, cinch connector must only
be connected to devices with the suitable cinch terminals. For this, observe also the connection
information in the section "Technical Data".
Connect the cinch sockets at the rear of the casing to the power amplifier inputs.
The red socket is a terminal for the right channel
The white socket is a terminal for the left channel
c) AUX IN Connection
You can connect an external audio device (e.g. portable MP3 player) to the port AUX IN (4) whose signal is
played back via the vehicle speakers.
Connect the port AUX IN (4) with the audio output of the external device.
d) Hands-Free Microphone Connection
Connect the plug of the hands-free microphone to the coupling of the black connection line at the back of
the device.
e) Connection of the Speakers and the Power Supply
Vehicles equipped with an ISO plug can be connected directly to the ISO connection terminal if the plug
assignment is the same (please check beforehand!). If the plug assignment differs, use a vehicle-specific
adapter from a vendor for connection.
Please refer to the following figures for the contact assignment of the ISO connection socket of the SD
tuner.
Please ask your car dealer for the respective assignment of your vehicle system plug.
46
Advertenties
