Advertenties
Beschikbare talen
Beschikbare talen
System connector B (speaker connection)
(1) Speaker rear right (+)
(2) Speaker rear right (-)
(3) Speaker front right (+)
(4) Speaker front right (-)
(5) Speaker front left (+)
(6) Speaker front left (-)
(7) Speaker rear left (+)
(8) Speaker rear left (-)
System plug A (power supply)
(1) (Not assigned)
(2) (Not assigned)
(3) (Not assigned)
(4) Continuous current +12V
(5) Aerial control output
(6) (Not assigned)
(7) Ignition +12V
(8) Ground
• The constant current terminal +12V (4) must be connected to a cable that also supplies 12V permanently
when the ignition is off (terminal 30 of the on-board network). This terminal serves to save the user set-
tings, time, etc.
• The aerial control output (5) supplies a voltage of +12V when the device is switched on. This cable can
be used for the power supply of an electrical aerial and for the voltage for switching on a car amplifier.
• The ignition terminal +12V (7) must be connected to a cable that is only live with +12V when the ignition
is on (terminal 15 of the on-board networks).
Do not connect this terminal to continuous current, otherwise the on-board battery could be
discharged when the vehicle is parked for an extended period of time.
• Connect the ground connection (8) with the vehicle body.
Adhesive techniques which become ever more common and painted metal parts impair the elec-
tric conductivity. Therefore, not every metal part is a suitable earthing point.
All manuals and user guides at all-guides.com
47
Advertenties
