Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Control panel
1
On/Off button
2
Programme selection / RESETbutton
3
Indicator lights
4
Programme lights
Programme lights A and B
In addition to the selection of the corre-
sponding washing programme; these lights
will also guide you in the following operations:
End
Comes on when a washing programme has ended. It also has added functions of
visual signalling as:
– the setting of the water softener level,
– deactivation/activation of the audible signals,
– intervention of an alarm due to malfunction of the machine.
Salt
Comes on when the special salt has run out.
Setting mode
Press the On/Off button; if ALL programme
lights are off and the End indicator light is
flashing, the appliance is in setting mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– deactivating/activating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button; if a programme light
is on with a fixed light, the last performed or
selected programme is still set. In this case,
to return to setting mode the programme has
to be cancelled.
– setting the water softener level,
– deactivating/activating the audible signals.
Indicator lights
To cancel a set programme or a
programme in progress
Press and hold, for about 3 seconds, the
programme selection /RESET button until
the End indicator light is flashing. The pro-
gramme has been cancelled and the ma-
chine is now in setting mode.
Audible signals
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing:
– end of the washing programme,
– intervention of an alarm due to malfunction
of the machine.
progress 65
Advertenties
Hoofdstukken
Inhoudsopgave
