Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B
S
/H
ACK
HELL
ARDWARE
clean with soap and water as necessary.
4.2.2 L
AUNDERING
IMPORTANT! PRIOR to Laundering: The MAC Back cover MUST be removed
from the inner foam cushion. (Note: Do Not Dry Clean, Do Not Bleach).
IMPORTANT! Adequate drying is a crucial factor in the care and maintenance
of all covers. The covers should be dried completely prior to use on the cushion.
Air drying of covers is recommended.
I. MACHINE LAUNDERING
• Carefully remove the E2 Back cover from the back shell by releasing the velcro
hook & loop fasteners along the top, bottom and inside of the back shell.
• Carefully remove the inner foam cushion from the inside of the E2 Back cover.
• Meshtex fabric covers can be hand-washed or machine-washed in warm water not higher
than 60°C (140°F), on a delicate cycle with neutral detergents such as Tide or Persil.
• To avoid possible damage, ensure the cover does not come in contact with any
other sharp garment accessories during laundering.
II. DRYING INSTRUCTIONS (OUTER COVER)
Adequate drying is a crucial factor in the care and maintenance of the outer cover. E2
covers should be dried completely prior to use. Air drying is the method of choice.
• DO NOT WRING OUT.
• Hang cover and allow it to drip dry to minimize wrinkling.
• Alternatively, covers may be tumble-dried on low/cool setting.
• DO NOT IRON
Polyurethane (PU) coated fabrics can absorb liquids for short periods causing a temporary change to the PU
characteristics. The wet cover is more vulnerable to physical damage and should not be used until fully dried.
4.3 REUSE/RECYCLING
WARNING! Risk of Injury
Always have an authorized dealer inspect the product for damage or wear PRIOR to
transferring the product to a different user. If any damage is found, DO NOT use this
product. Failure to heed these warnings may result in severe injury.
This product is suitable for re-use. The outer cover (fabric and foam), back shell
and mounting hardware must be inspected by a qualified dealer or healthcare
professional before re-use. If any damage is found, DO NOT RE-USE
PRIOR to reuse, clean and disinfect the product thoroughly in accordance with local
government regulations.
4.4 DISPOSAL
The disposal and recycling of used devices and packaging must comply with the
applicable local legal regulations. Ensure that the back is cleaned prior to disposal
to avoid any risk of contamination.
: The back shell and hardware/components can be wiped
I
NSTRUCTIONS
HAND-WASHING INSTRUCTIONS (OUTER COVER)
OR
PRESS Meshtex covers
OR
- 9 -
- 9 -
Advertenties
Inhoudsopgave
