Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3.0 M
ATRX
3.1 MATRX E2 BACK INSTALLATION & SET-UP
IMPORTANT! The installation and set-up of the Matrx E2S/E2D Back MUST be
performed by a Qualified Technician and/or Healthcare Provider.
The Matrx E2S/E2D Back has been designed to install onto back canes that are up to
1" (25mm) wider or 1" (25mm) narrower than than the nominal back width.
The type of mounting hardware required will vary depending on several factors,
including the needs of the end user, the type of wheelchair being used, and the height
of the E2 back shell being installed.
4.0 C
ARE AND
4.1 INSPECTION
Frequent visual inspection should be performed on all components, including uphol-
stery, foam, hardware/fasteners and any plastic components.
W
WARNING! Risk of injury or damage
• Do not continue to use this product if problems or damage are discovered;
• Corrective maintenance can be performed by or arranged thru your local
service provider
Weekly: Inspect ALL fasteners weekly to ensure that mechanical connections
and attaching hardware are tightened securely.
Monthly: Perform a visual inspection of parts including hardware, brackets, upholstery
materials, foam, and plastics for deformation, corrosion, breakage, wear or
compression. Replace damaged/worn components if necessary.
4.2 CLEANING/LAUNDERING
W
WARNING! Risk of damage
To avoid infectious exposure, inspect cushion thoroughly and properly clean
and disinfect any materials soiled with blood or other bodily fluids.
CAUTION! Risk of damage
• DO NOT use cleaning and disinfecting agents with abrasive, staining, or polymer-
damaging properties such as phenols, alcohols, or bleaches. Chlorine solutions used
even in low concentrations on a regular basis can diminish the life of the cover.
• Chosen cleaning agents and disinfectants must be compatible with one another
in order to effectively protect the materials on which they are applied.
• Keep clear of open heat sources during cleaning.
4.2.1 G
ENERAL
O
C
: The Meshtex fabric used on the E2 Back cover can be wiped with a
UTER
OVER
damp absorbent towel, cloth, or paper towel. Remove all gross contamination from
surface (i.e. food particles, urine, feces, blood). Spot-clean with mild soap and water.
E2S/E2D B
M
AINTENANCE
MAINTENANCE
AND
C
:
LEANING
I
ACK
NSTALLATION
COVERS:
OF
- 8 -
- 8 -
Advertenties
Inhoudsopgave
