Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
How to keep your dishwasher in shape
■
After every wash
After every wash, turn off the water supply to the appliance
and leave the door slightly ajar so that moisture and odors
are not trapped inside.
■
Remove the plug
Before cleaning or performing maintenance, always remove
the plug from the socket. Do not run risks.
■
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, do
not use solvents or abrasive cleaning products. Rather, use
only a cloth and warm soapy water. To remove spots or stains
from the surface of the interior, use a cloth dampened with
water and a little white vinegar, or a cleaning product made
specifically for dishwashers.
About the electrical connection
CAUTION!
for personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD.
Electrical requirements
This dishwasher is designed for connection to 220-240 V - 50 Hz, with a fuse of 16 Amp.
WARNING!
Make sure the electrical socket is earthed before connecting the appliance.
Electrical connection
After making sure that the voltage and the frequency values for the current in the home correspond to those on the rating plate, insert
the plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug, please consult the manufacturer or its service agent or a similarly qualified person.
Cold water connection
Connect the cold water supply hose to a threaded (
If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear
and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.
Hot water connection
The dishwasher is not suitable for hot water connection.
Positioning the appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the
adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right
or the left to facilitate proper installation.
■
When you go on holiday
When you go on holiday, it is recommened that you run a
wash cycle with the dishwasher empty and then remove the
plug from the socket, turn off the water supply and leave the
door of the appliance slightly ajar. This will help the seals last
longer and prevent odors from forming within the appliance.
■
Moving the appliance
If the appliance must be moved, try to keep it in the vertical
position. If absolutely necessary, it can be positioned on its
back.
■
Seals
One of the factors that cause odors to form in the dishwasher
is food that remains trapped in the seals. Periodic cleaning
with a damp sponge will prevent this from occurring.
3
⁄
inch) connector and make sure that it is fastened tightly in place.
4
25
Advertenties
Hoofdstukken
Inhoudsopgave
