Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Figure 20 - Cleaning the Inlet Valve (Kit part number
0418714)
Cleaning or servicing the inlet valve may be required if
i
the unit has priming problems. Priming problems may
be prevented by properly cleaning the sprayer and
following the long-term storage steps.
Perform the Pressure Relief Procedure (see figure 7) and
unplug the sprayer.
Danger
1. Remove the hopper. Loosen the locknut by turning
anticlockwise.
2. Remove the inlet sleeve (1) with a suitable tool (e.g. socket SW
11).
3. Inspect the threads on the inlet sleeve and the inlet sleeve
O-ring (2). Remove any accumulated paint.
4. To remove the inlet valve, place the assembly aid (8) on a
socket (6) with a 5/8" insert (7). Insert the inlet valve tool into
the inlet valve (a). Remove the inlet valve screw connection by
unscrewing anticlockwise from the housing.
5. Retrieve the inlet valve (9) and the inlet valve O-ring (10) from
the inlet valve housing. Clean or replace and lubricate the
O-ring with a light household oil.
6. Set the inlet valve O-ring (10) back into the housing, and set
the inlet valve (9) on top of it.
7. Replace inlet fitting (8) into the housing. Tighten with the
inlet valve tool (7) and ratchet (4, 5, 6).
8. Replace the seal (3). Place the inlet sleeve O-ring (2) onto
the inlet valve fitting (9), and replace the inlet sleeve (1) by
twisting it clockwise.
9. Replace the hopper.
Figure 21 - Cleaning the Outlet Valve
Cleaning or replacing the outlet valve may be necessary if your
spray performance remains poor after having performed all the
steps contained in the Troubleshooting section of this manual.
Perform the Pressure Relief Procedure (see figure 7) and
unplug the sprayer.
Danger
1. Unscrew the outlet valve from the outlet valve housing using
an adjustable wrench.
2. Inspect the inside of the outlet valve housing (a). Clean any
accumulated paint.
3. Replace with a new outlet valve. Tighten into outlet valve
housing with an adjustable wrench.
All manuals and user guides at all-guides.com
Parts Lists
Figure 22 - Spray Gun/Spray Hose
0418705
0418706
0418707
0418708
0418712
0418713
All spare parts listed above are wear parts, and are not covered
by warranty!
18
Wagner Project 115 - 0418A
Item Part #
Description
1 0418717
Gun assembly (without nozzle ) ....................1
2 0418705
Tip, XS ......................................................................1
2 0418707
Tip, M .......................................................................1
3 0418711
Filter, XS-S (red) ...................................................2
3 0418712
Filter, M (yellow) ..................................................2
4 0418718
Spray hose, 7.5m, red ........................................1
Part #
Description
Spray tip, XS .....................Water-soluble and solvent
Spray tip, S .......................Synthetic resin-based paints,
Spray tip, M ......................Enamel paints, undercoats,
Spray tip, L .......................Enamel paints, undercoats,
0418711
Filter, XS - S (red, 2 pack)
Filter, M (yellow, 2 pack)
Filter, L - XXL+ (white, 2 pack)
0418714
Valve set (inlet and outlet valve)
Quantity
based enamels and paints, oils
and release agents
PVC paints
primers, fillers, indoor latex
paints and indoor emulsions
primers, fillers, indoor latex
paints and indoor emulsions,
anti-corrosive paints
Advertenties
Inhoudsopgave
