Download Inhoudsopgave Inhoud Print deze pagina

Troubleshooting; General - Atag HI6271F Handleiding

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

TROUBLESHOOTING

General

Troubleshooting table
SYMPTOM
Text appears in the display
when the appliance is
connected for the first time.
The fan runs on for several
minutes after the hob has
been switched off.
A slight smell is noticeable the
fi rst few times the hob is used.
You can hear a ticking sound
in your hob.
The pans make a noise while
cooking.
The service department telephone number can be found on the
guarantee card provided or on 'www.atag.nl'.
If you notice a crack in the glass top (however small), switch the
hob off immediately, unplug the hob, turn off the (automatic) fuse
switch(es) in the meter cupboard or, in the event of a permanent
connection, set the switch in the power supply lead to zero.) Contact
the service department.
If the appliance does not work properly, this does not always mean
that it is defective. Try to deal with the problem yourself fi rst by
checking the points mentioned below or check for more information
the website 'www.atag.nl'.
POSSIBLE CAUSE
This is the standard set-up
routine.
The hob is cooling down.
The new appliance is heating
up.
This is caused by the capacity
limiter on the front and back
zones. Ticking can also occur
at lower settings.
This is caused by the energy
fl owing from the hob to the
saucepan.
GB 30
General
SOLUTION
Normal operation.
Normal operation.
This is normal and will
disappear once it has been
used a few times. Ventilate
the kitchen.
Normal operation.
This is caused by the energy
fl owing from the hob to the
saucepan. This is not harmful
for the pans or hob.

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave