Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Installation Manual : Overall assembly diagram
Electrical distribution
board
16 A circuit breaker (for 400V),
day/night switch
and 30 mA differential
INSTALLATION PRECAUTIONS :
• Temperature at the installation point
should be between 4°C and 35°C
• Position the water heater as close as
possible to the water supply rooms
• If the water heater is installed
above a living area,
install a water retention tank
Hot water
Cold
outlet
water inlet
È
L1
Earth
L2
Dielect.
L3
connect.
Siphon
Tap in a bathroom
for example
CAUTION
If your pipes are not made from
copper (PER, multi-layer, etc.),
it is MANDATORY to fit a copper
pipe with a minimum length
of 50 cm (DTU.60.1) and/or
Temp.
a temperature limiter at your tank's
limiter
hot water tank. (see p. 28)
Cold water
Hot water
25
Advertenties
Hoofdstukken
Inhoudsopgave
